Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Crimpson

Pages: [1] 2 3 ... 5
Services Wanted / custom go-kart build
« on: July 04, 2017, 09:02:06 AM »
So I have this Yamaha gas golf cart I want to transform to a go-kart/buggy
I have a small flux welder that can do the job.
Need to track down an engine from an old snow mobile or something and mount it.
It has a torque converter that can be cleaned up, needs fuel tank.
Has a good frame, wheels and steering. (that's about all that's good on it)

I'll trade services, you can borrow it whenever you want if you help me build it.
I'm right in the middle of weaverville.
It's just been sitting in the yard too long and I won't have time to really work on it for a while still.
Been dreaming of making this a badass all-terrain go-kart.

Items For Sale / Re: Strata-Rib Metal Roofing
« on: June 29, 2017, 10:32:58 AM »
this item has been sold.

Items For Sale / Re: Shower Stall For Sale
« on: June 29, 2017, 10:32:29 AM »
This item has been sold.

Admin Board - Site Development / Notes
« on: June 26, 2017, 12:43:22 PM »

Attachment size limit - fixed- potentially dangerous images are re-encoded
Automatic image resizing
Facebook url previews - fixed- sharing url's on facebook will now display the site's logo image
Redesign facebook logo image
Need slideshow for reserved space at top of home page. Need to select images.
Change forum top banner
Attachments in post need to be changed from column to row or block.

Add "Bone Yard" forum page
Add "Music Connection" board and calendar for all local music events.

Facebook Pages to be added on home page:
Trinity pet connection
Hayfork Facebook pages (need sources)

Rants / Fourm Rules
« on: June 26, 2017, 12:36:50 PM »
Just... be cool.
Nothing over the top or it'll get edited or deleted.
Nothing too personal.
If there's problems, they'll be addressed.

Everyone has anonymity here. No names can be tied to comments unless that user has reviled their own identity. You can really say what you want to say without anyone knowing it was you who said it.

Enjoy. Try not to get your panties twisted.

Earth & misc. / DIY Solar Water Heater
« on: June 26, 2017, 12:13:54 PM »
So Here it is, 900 feet of poly tube coiled flat on an 8'x8' plywooded frame.
This is my second build, stage two of the prototype.

It bursted on me once so far and now I've installed a 75psi hot water pressure relief valve for about $15, we'll see if that works. This sucker gets HOT, and it's enough hot water to do anything I need.

What's needed:
2x500' 5/8 utility poly tubing. Irrigation line has thinner walls so be sure to get the utility.
2 sheets of plywood.
10 2x4x8' whatever lumber
various barbed fittings, connectors, and more hose clamps than I cared to count.

So I used some scrap sheet metal on top of the plywood and it does help capture and transfer the heat. It's optional though. Once you cover it with clear roofing it's going to get plenty hot, even without the roofing.

I made the coils by laying the roll flat and unrolling it from the outside in. This is really the only way to do this. However, I'm probably going to end up recoiling it one more time because as I made the coils tight together, the tubing expanded with the pressure and heat and pushed some of the coils up. still works fine though, just being ocd.

Contact me via private message or by leaving a public reply on this topic.

Trinity County Community is setting up and hosting free blog spaces for local stores, at-home businesses, and crafters.
Wordpress is a professional blogging platform with complete flexibility and user-friendly tools to build and customize your website for whatever your needs are. Worpreress also boasts hundreds of free addons to extend the functionality of your website as well as thousands of free themes to quickly and easily change the entire appearance of your website.

Here are a few live sites we're already hosting!

Ned's Collectables (coming soon)
Crafty Fox
Woodwolf Farms (coming soon)

By Damon Arthur of the Redding Record Searchlight

To prevent an outbreak of a deadly fish-killing disease, federal officials plan to begin tripling the amount of water flowing out of Lewiston Dam and into the Trinity River.

Starting Thursday, the amount of water coming out of Lewiston Dam will increase from 450 cubic-feet per second to about 1,300 cfs, according to the U.S. Bureau of Reclamation, which operates the dam.

The Trinity River flows into the Klamath River and the higher flows in the Trinity are meant to aid salmon and trout in the Klamath.

Federal officials and others are worried about an outbreak of a disease called ich, which spreads among fish crowded into slow-moving pools of warm water in the river. The higher flows from the Trinity are supposed to flush out the lower Klamath with cooler water and reduce crowding among the fish.

A small number of fish have become infected in "extremely warm water" in the Klamath, said Michael Belchik, a senior fisheries biologist for the Yurok Tribe, which is based on the Klamath River.

An ich outbreak in 2002 killed some 35,000 salmon and steelhead trout in the river.

"We take this threat to our fish very seriously, and we're looking at every option to protect our fish," said Thomas P. O'Rourke, Yurok Tribe chairman. "We don't want to go through another catastrophe like the fish kill in 2002, and we will do anything we can to avoid that outcome this year."

The Klamath Fish Health Assessment Team, which monitors fish fitness in the river, rated danger in the stream on Wednesday at "yellow" because of unfavorable physical and chemical conditions in the stream.

There are four "levels of readiness," for the river, starting at green, the lowest level and best conditions for fish. Levels increase to yellow, orange and red, which means a fish kill is imminent or underway, according to the team's website.

During the past several years of warm summer weather and drought, the higher releases from Lewiston Dam have been an annual event in August and September.

This year's higher flows, which could go as high as 3,500 cfs, are expected to last until late September.

David Coxey, general manager of the Bella Vista Water District in Redding, said sending more water down the Trinity River means there will be less water for cities and agriculture in the Sacramento and San Joaquin valleys.

Nearly all the municipal water districts in the Redding area get water through the bureau.

"It's disheartening how our supply reliability continues to erode," Coxey said.

There is also less hydropower generated when more water is sent down the Trinity River, Coxey said.

Water is shipped via large pipes from Lewiston Lake to Whiskeytown Lake, where it is used to also generate power at the Carr Powerhouse. The water is then shipped by pipe again from Whiskeytown to Keswick Reservoir, where power is generated again at the Spring Creek Powerhouse.

Higher flows into the Trinity and Klamath rivers also ultimately mean less water flowing into the Sacramento River to aid endangered winter-run chinook salmon that spawn in the river in Redding, Coxey said.

"This is a discouraging decision that further hurts the salmon over here," he said.

Gardening and Wildlife / Trinity farms for compliance
« on: August 17, 2016, 10:07:05 AM »

Community Discussion and General Bulletin Area / Formatting cheat sheet
« on: August 17, 2016, 09:54:58 AM »
This post won't display correctly unless you're logged in.

- - - - - - Marquee! Moving on to Youtube embedding and iframe use - - - - - -
Embedding Youtube Videos:

1) Go To YouTube and pick a Video any video which you want to embed on Simple Machine Forum
2) Click the Share tab
3) After that You need to click Embed
4) Once the Embed is clicked you will able to see the Iframe Code - Copy that Code
5) Then Go to Your Forum were you want create a new topic / post
6) Lets put some content before you embed a YouTube Video in Simple Machine Forum (Best Practice Tips from YouTube)
7) After the Content You need to Put some simple Code as below
Code: [Select]
[b][center][html] YouTube Video Iframe Code [/html][/center][/b]

Iframe code

iframe can be used to show most other sites in your post window.
Code: [Select]
[center][html]<iframe width="800" height="400" src="WEBSITE URL HTTP://mysite.comwhatever" frameborder="0"></iframe>[/html][/center]Note: iframe does not use BBC tages [ ] instead uses < >
You can change the width and height
iframe does not work with facebook and other certain sites, or any site you must be logged into to use.
iframe must be within the "html" tags but doesn't require the "center' tags

Attachments inserted into posts
Attachment options

Code: [Select]
[attachment] id=[b]{id}[/b] {parameter}={value}][/attachment]
Allowed parameters:
id                   {attachment id}   ID number of the attachment to show inline (NOT attachment number!)
width                   {width}   Desired width of image to show.  Valid: positive integers.
height               {height}   Desired height of image to show.  Valid: positive integers.
float                   {float}   Floats image to relation to everything else.  Valid: left, right, center
margin           {pixels}   Margin around inline attachment.  Valid: positive integers
margin-left           {pixels}   Left margin around inline attachment.  Valid: positive integers
margin-right   {pixels}   Right margin around inline attachment.  Valid: positive integers
margin-top    {pixels}   Top margin around inline attachment.  Valid: positive integers
margin-bottom   {pixels}   Bottom margin around inline attachment.  Valid: positive integers
border-style   {style}   Border style.  Valid: none, dotted, dashed, solid, double, groove, ridge, inset, outset
border-width   {pixels}   Border width around inline attachment.  Valid: positive integers
border-color   {color}   Border color.  Valid formats: plain text, #xxx, #xxxxxx, rbg(d,d,d)
scale            {answer}   Override scaling of image.  Valid: true, false, yes, no
msg                   {msg ID}   Message ID number.  Valid: positive integers.

The Old Way:
If you want to insert an image inline in the post somewhere, the image needs to be on the internet allready somewhere, either from an image hosting site or uploaded here as an attachment first. If you upload it here as an attachment, you can then view your post, view your attached image, right click on your image and click "copy image location". You now have the image's URL.
Insert your image like so:
Code: [Select]
You can also resize your image:
Code: [Select]
[img width=300]http://image-url[/img]you can use any width, numbers are in pixels.

Below are the thumbnail of the original attachment that was uploaded.

Basic BBcode Tags

Here is a link to the basic bulletin board codes by SMF

  Here's the latest conspiracy debunking they've attempted.

So I looked into the "research" and ARE YOU FUCKING KIDDING?
This is the "scientist's website that published the report:

"Nearly 17% of people in an international survey said they believed the existence of a secret large-scale atmospheric program (SLAP) to be true or partly true. SLAP is commonly referred to as “chemtrails” or “covert geoengineering,” and has led to a number of websites (e.g., Global SkyWatch) purported to show evidence of widespread chemical spraying linked to negative impacts on human health and the environment.

To address these claims, we surveyed two groups of experts—atmospheric chemists with expertise in condensation trails and geochemists working on atmospheric deposition of dust and pollution—to scientifically evaluate for the first time the claims of SLAP theorists.

Results show that 76 of the 77 scientists (98.7%) that took part in this study said they had not encountered evidence of a SLAP, and that the data cited as evidence could be explained through other factors, including well-understood physics and chemistry associated with aircraft contrails and atmospheric aerosols. "

All they did was show four pictures to their "experts" and asked for an explanation. This was their study. Are you fucking kidding?

Presented with four different images of trails behind aircraft (a-d), experts uniformly responded that a secret, large-scale atmospheric spraying program (SLAP) was not the most parsimonious explanation for the depicted phenomena (pie charts). In each case, the stacked bars show the experts’ most common alternative explanations.

76 of the scientists had 15 different answers and can't even agree on one because they're all theoretical, based on pictures, while the last scientist was all like "Chemtrails, yep."

Admin Board - Site Development / Re: Post Formatting Resources
« on: August 17, 2016, 04:37:43 AM »
Embedding Youtube Videos:

1) Go To YouTube and pick a Video any video which you want to embed on Simple Machine Forum
2) Click the Share tab
3) After that You need to click Embed
4) Once the Embed is clicked you will able to see the Iframe Code - Copy that Code
5) Then Go to Your Forum were you want create a new topic / post
6) Lets put some content before you embed a YouTube Video in Simple Machine Forum (Best Practice Tips from YouTube)
7) After the Content You need to Put some simple Code as below

YouTube Video Iframe Code

Pages: [1] 2 3 ... 5